linksys wrt54g2 disable wifi protected setup

Configuring wireless security (encryption) – WPA2 or WEP Wireless SSID Broadcast: Leave it enabled.

Wireless Channel: Leave this on the default option, which is 6. You see this when searching for wifi on any device. Wireless Network Name(SSID): any name you want to give your wifi network. Under Basic Wireless Settings, select the following: Here, you can set up wifi, with necessary encryption etc. If so, you are connected to the internet.

It will have some value other than 0.0.0.0. Now, go to “Status” page, and look for IP address. Hit enable and click “Clone Your Mac-Address Clone”. Hit “Save Settings”.īack on the admin page, click Mac Address Clone. When prompted for username and password, leave username blank and type password as admin.įrom the drop down menu on the page, select “Automatic Configuration DHCP”. Now that the connections between router, modem and computer are set up and tested, we need to tweak the settings from router administration page. Check that the corresponding light for net also comes on. Now, connect a cable between your ADSL modem and the “Internet” port of the router. Check that the respective port number lights up on the top of the router. Now, connect a cable between your computer and any of the four LAN ports on the router. If not, your internet is not working properly. You should get a response of packets sent = 4 received = 4. Ensure that your net connection is working, by opening any page in a browser. Setup Linksys router with cable connectionĬonnect the modem to your computer directly.

If it does not work, follow the steps below to configure the router manually. You can try the Linksys setup wizard software. The reason is the greatly reduced RAM in the router. Sadly, newer versions of this seems to have reduced hardware capabilities, and therefore no support for DD WRT. The WRT54G2 V1 router that I have is popular, and supports custom firmware like DD-WRT and Tomato well. If you have any doubts or questions, leave them in comments below and I’ll try to help.

Recently, I tried setting it up again, and presto, this time it worked! Below is a walkthrough, along with problems you may encounter and possible solutions. I gave up trying to set up the wifi router with my DSL modem then, and it has been accumulating dust in my attic ever since. I had purchased a Cisco Linksys WRT54G2 V1 router nearly two years ago.

Linksys wrt54g2 disable wifi protected setup